Diesel generator set installation site selection and exhaust design

After the diesel generator set arrives, where to install it is a question that many customers need to consider first. Haixing Power believes that everyone should consider two core issues:Generator setInstallation site selection and exhaust design.

One of the early design decisions is whether to locate the generator set indoors or outdoors. The overall cost and ease of installation of a power system depends on the layout and physical location of the equipment - generator sets, fuel tanks, ventilation ducts and louvers, etc. Special attention needs to be paid to ensuring the ventilation of the generator set. Since the generator set is composed of a diesel engine, a generator, and a control system, enough oxygen is needed to burn and do work during engine operation, and the cooling system of the generator and engine also needs A fan is needed to cool down the air.

The air inlet and exhaust vents should be placed on both sides of the machine room as much as possible, and the air flow direction should be from the control box side to the air exhaust vent side. In addition, it should be considered that the exhaust gas generated during the operation of the diesel engine also needs to be discharged outdoors. For some units placed in the basement, air intake and exhaust shafts must be installed to meet the operating requirements of the generator unit. In order to reduce the noise and vibration during the operation of the generator set, shock absorbers and reinforced concrete foundations can be installed at the base of the generator set. For occasions with relatively high noise requirements, exhaust silencers can be installed on the inlet and exhaust air of the generator set, and the machine room can be Noise reduction treatment on the walls and roof.

Whether it is economic production or modern construction facilities, diesel generator sets are important palace facilities. Only by rationally designing the placement site can the power supply effect of the equipment be exerted and the power supply system more secure.