Selection of generator sets and precautions when using water pumps and power

Haixing generator sets often receive consultation information on the selection of power generation units from customers. Now Haixing will give some suggestions for the selection of power generation units when purchasing power generation units , hoping to help everyone. In addition, the following description will be given to many customers when using generators, water pumps, and power.
1. Because the actual output power of generators, water pumps, and power will be affected by factors such as altitude, temperature, and environmental humidity. When the altitude, temperature and ambient humidity increase, the power of the generator will drop to different proportions. Please refer to the relevant information of the generator. Please consider it when calculating the power of the generator and then purchase it to avoid insufficient power use.
2. For electrical appliances of the same power, due to the different types of electrical appliances, the starting current varies greatly, and the demand for generator power is different. Therefore, when purchasing products, users should first calculate how many high-power generators can meet normal use. The specific reference is as follows:
① The power ratio of resistive electrical appliances (such as tunnels and electric furnaces) is 1:1.
② The power ratio of inductive electrical appliances (such as lamps) is 1:2.
③ The power ratio of power tools and electric fans is 1:3 (such as an angle grinder).
④ The power ratio of air compressors, woodworking electric planers, machine tools, and milking machines is 1:4 (for example, an air compressor with 1KW requires a 4KW generator).

Things to note when using generators, water pumps, and power
1. The engine oil should be filled in place. For machines without oil marks, the oil should be added until the oil is about to flow out (when the machine is laid flat). Machines with oil marks should be filled with engine oil strictly in accordance with the requirements in the instructions. If too much oil is filled, it can easily cause black smoke and speeding. If too little oil is filled, it can easily cause the cylinder to be held.
2. Do not fill the oil into the machine oil tank when the machine is working to avoid danger.
3. Do not add fuel to the machine's fuel tank when the machine is working, so as not to burn the machine when the machine catches fire.
4. The oil must be changed after the first time is used for 20 hours or stored for one month, otherwise the machine will be excessively worn. After that, change the oil for every 100 hours of use or 3 months of storage (the manual of this machine shall prevail).
5. When the temperature is below 0°С, the diesel engine must use diesel with the corresponding label of the ambient temperature of the equipment. Otherwise, the generator will not start normally after the diesel is waxed.
6. When the temperature is below 0°С, the engine oil must use a model oil corresponding to the ambient temperature of the equipment, otherwise it will easily cause damage to the generator power.
7. The operator is required to read the instructions carefully before use. It must inspect and operate according to the instructions. Otherwise, the user shall bear the responsibility for damage caused.

This article is referenced and cited for the Internet. If there is any infringement, please contact our company to delete it.