How to use diesel generator sets correctly and safely in enterprises and companies [Haixing Technology]

How to correctly use diesel generator sets in enterprises and companies is a question that many customers have. Here, Haixing generator sets give you some suggestions:
1. Diesel generator sets must be operated by people familiar with the unit structure and master the operating procedures. New or newly overhauled diesel units must be run in and maintained in accordance with regulations after 60 hours of running-in and maintenance.
2. Before the new or long-term generator is put into operation, it must undergo strict inspection, mainly check the winding insulation, wiring conditions, etc. If there is any inconsistency, it will be handled.
3. After starting the diesel engine, the speed should be slowly increased. After inspection and confirmation, no-load operation can be carried out from low speed to rated speed. When running at no load, focus on checking the oil pressure, whether there are abnormal noises, excitation current, three-phase voltage changes, etc. If there are abnormal situations, the machine should be stopped immediately for inspection. After finding out the situation, start again. If normal, it can be put into normal operation. The operator must closely monitor the changes in the instrument on the control screen, whether it is within the permitted scope, and make corresponding adjustments.
5. During operation, the operator should keep an appropriate distance from the live equipment and wear labor protection equipment. Pay attention to the order of reverse switch operation. If the power outage is not allowed, first disconnect the branch switch, then disconnect the main switch, and then switch the position of the four-pole double-tap knife switch. When power is sent, the order is carried out in the opposite order. When shutting down normally, you should first remove part of the load, then turn off the main switch, and then turn off the diesel engine. It is not allowed to not pull off the main switch, and the power will be cut off as the diesel engine turns off. After shutdown, perform routine inspections on the unit and record the operation status (working diary).
6. In case of electric shock, the power switch should be cut off quickly, or the power supply should be quickly cut off or disconnected from the power supply with an insulator. Then rescue is carried out and the doctor is invited to the scene to rescue. In case of flooding of electrical equipment, the relevant power supply should be cut off immediately, reported to the local power supply station, and then fire is put out. Dry fire extinguishers, carbon dioxide fire extinguishers, etc. should be used to extinguish live equipment, and water is not allowed.