What are the subsequent operations after the generator set is shut down?

Generator setCan it be left alone after shutting down or stopping according to normal procedures? This is obviously inappropriate. After the generator set is connected, some follow-up operations are required to complete the entire shutdown process.

What does the follow-up operation include? Haixing Power summarized it for everyone:

Check whether the unit has 'three leaks' (lubricating oil, fuel, coolant);

Close the fuel valve;

Close the entrance and exhaust facilities of the computer room;

Close the generator output circuit breaker;

Turn off the power key switch of the control panel, take out the key, and keep it properly;

When shutting down for a long time or performing maintenance on the unit, the negative cable of the starting battery of the unit must be removed, and all fuel and coolant should be drained.

For self-starting units, some of the above provisions are not applicable. The work of the self-starting unit after shutdown is to keep it in the state before starting (standby state) in preparation for emergency start.

Some operations after shutting down are easily overlooked by everyone. If these details are ignored, the hidden dangers left are not small. Therefore, if you adhere to the correct shutdown process, don't forget the subsequent operations.