How to deal with dirt from the cooling system of the automotive generator set?

Sometimes when people encounter overheating of the car engine, it is mostly caused by dirt in the cooling system. At this time, everyone needs to clean the cooling system. Haixing will briefly talk about the choice and specific treatment of detergents here.

(1) Selection of cleaning agents

When choosing cleaning agents, there are three principles for reference:

① For most precipitation and corrosion, the effect of using slightly acidic cleaning agents is better.

② If the gel is not hard, you can use an alkaline or non-corrosive detergent to clean (the acidity is better, but the alkaline detergent can achieve the effect).

③ For oily impurities in the cooling system, acidic cleaning agents must be used to complete this task.

Taking into account the above three principles in combination, plus the dirt in domestic automobile cooling systems is mainly precipitated, oily impurities and rust scales. Only by using acidic cleaning agent products can we fully meet the current market requirements. Most cooling system cleaning agents on the market are alkaline, so it can only adapt to the needs of a small number of cars.

(2) Treatment method

After connecting the equipment to the car, add the product to the engine cooling system to ensure that it works for about 30 minutes when it reaches the normal working temperature, and then use the equipment to replace the old antifreeze.

Untimely cleaning of dirt is the source of many failures of generator sets , and these dirts often come from inferior engine oil and lubricating oil. Therefore, starting from the source, everyone should resist inferior products to avoid harm to the generator set.