How to effectively save oil for generator sets?

Fuel is indispensable to generator sets . During operation, we must observe the amount of fuel in time. As a considerable operating cost expenditure, how can we save oil? Haixing staff summarized six points:

1) Maintaining the oil supply angle: The oil supply angle is offset, which will cause the oil supply time to be too late and the fuel consumption will increase significantly.

2) Ensure that the machine does not leak oil: The treatment method is to apply valve paint to the gasket and grind it on the glass plate to smooth it, and the oil pipe joint is positive. A diesel recovery device is added, and the return oil pipe on the oil nozzle can be connected to the hollow core screws to allow the return oil to flow into the oil tank.

3) Increase the temperature of the cooling water of the diesel engine: Increased water temperature can make the diesel burn more completely, the oil viscosity will be smaller, which can reduce motion resistance and achieve fuel-saving effect.

4) Appropriately increase the pulley of the diesel engine, increase the pump speed when the diesel engine is running slower, increase the flow rate and head, and achieve energy saving.

5) Purify the oil before use: More than half of the failures of the diesel generator set are from the oil supply system. The treatment method is to put the purchased diesel on precipitation for 2-4 days before use, and 98% of the impurities can be precipitated. If you buy it now, you can put two layers of silk cloth or toilet paper in the oil tank refueling filter.

6) Adjust the fuel injection pressure of the fuel injector.

The quality of fuel and the fuel system are important links that affect fuel saving. Therefore, the above six tips have been obtained. Doing the above six aspects well, I believe that fuel consumption will be greatly reduced and the work efficiency is good. Let’s try it quickly.