What should I do if the generator set leaks oil?

Many netizens like Haixing Power consulted about the oil leakage problem of generator sets . This is a common fault during our use. Haixing's technicians have summarized many cases and listed the following reasons. You might as well do a self-check first and check whether the following problems have occurred. First,

check whether the engine oil model, oil quantity, and oil quality meet the requirements.

The second is whether the bonding surfaces of various parts of the diesel engine are smooth and flat, and whether the processing size meets the requirements. The sand-turning parts and die-casting parts should be free of sand-eye air, and whether all kinds of paper pads, sealing strings, oil seals, and screws meet the requirements and are tightened.

Third, whether the lubricity of the diesel engine is smooth and meets the requirements (the oil return hole of the follow-up column of the air-cooled diesel engine is very important.

Fourth, the diesel engine without negative pressure must also check whether the breathing is smooth and unimpeded and meets the requirements, and whether the cylinder is serially air into the crankshaft, causing oil leakage.

Fifth, the machine temperature cannot be too high, cooling, and heat dissipation performance is good.

Reducing the failure rate of the generator set mainly depends on daily maintenance and complying with the corresponding operating specifications. Once suspected fault occurs during use, check it in time to avoid causing safety problems during continued use.