Generator noun (Chinese-English comparison)

The term 'Chinese-English' in the generator set is compared. Only when purchasing a generator set can you understand the

active
power (kW), which refers to the power actually supplied to the load by the generator set. It is provided by the engine of the generator set and is limited by the engine horsepower. The heating and driving motor rotation are completed by active power.
Active Power
Active power is the real power (kW) supplied by the generator set to the electric load. Active power creates a load on the generator set's engine and is limited by the horsepower of the

engine
. Active power does the work of heating, turning motor shafts, etc.
Backup Protection Backup
protection

consists of
protective devices, which are intended to operate only after other protected devices have failed to operate or detect a fault.
Base Load
Base load

is that portion of a building load demand which is constant. It is the 'base' of the building demand curve.
AC refers to the current fluctuating at a specific frequency between positive and negative maximums, usually at 50 or 60 Hz.
AC
Alternating Current (AC) is electric current that alternates between a positive maximum value and a negative maximum value at a characteristic frequency, usually 50 or 60 cycles per second (Hertz).

The baud rate
serial data transmission rate is approximately equal to the number of bits transmitted per second (Hertz). BPS can also be represented by BPS, and kBPS can be represented by kilobits/second.
Baud Rate
The speed of data transmission in serial data communications approximately equal to the number of code elements (bits) per second (BPS). Bits per second are also termed BPS, with the prefix (k) denoting

thousands
. The differential relay compares the current, and if it exists, it means that there is a fault in the protected area. These devices are often used to protect the coils of generators or transformers.
Differential Relay
A differential relay is a protective device that is fed by current transformers located at two different series points in the electrical system. The differential relay compares the currents and picks up when there is a difference in the two, which signifies a fault in the zone of protection. These devices are typically used to protect windings in generators or transformers.