 |
| Quantity: | |
|---|---|
Zichai Z180 series oil and gas dual control LNG diesel dual fuel engine adopts the key technology of oil and gas dual electronic control, changing the technical route of the traditional single control natural gas mode of 'gas in and oil out'. It adopts electronically controlled fuel supply mode and works with variable fuel supply advance angle in pure diesel and dual-fuel working modes. The electronic control unit (ECU) controls and regulates diesel injection and natural gas injection at the same time, and independently optimizes pure diesel and dual-fuel working modes. Calibrate the working MAP chart to optimize in-cylinder combustion; improve the fuel replacement rate, up to 85%; the common working conditions of ships are mostly low speed and high torque, the dual fuel mode can meet the low load gas filling needs, and fuel substitution under low load conditions The rate is relatively high; the emission index meets GB 15097-2016 'Ship Engine Exhaust Pollutant Emission Limits and Measurement Methods (Phase 1 and 2)' requirements.
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z6180ZLC/S-1 Z6180ZLCZ/S-1 | Z6180ZLC/S-2 Z6180ZLCZ/S-2 | Z6180ZLC/S-3 Z6180ZLCZ/S-3 | Z6180ZLC/S-4 Z6180ZLCZ/S-4 | Z6180ZLC/S-5 Z6180ZLCZ/S-5 | Z6180ZLC/S-6 Z6180ZLCZ/S-6 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1500 | 1500 | 1500 | 1500 | 1350 | 1350 |
| 7 | Calibrated power Rated power | kW | 600 | 551 | 515 | 478 | 540 | 495 |
| 8 | average piston speed Mean piston speed | m/s | 10.5 | 10.5 | 10.5 | 10.5 | 9.45 | 9.45 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side: Turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Overall dimensions Dimensions(L×W×H) | mm | Length × Width × Height: 2640 × 1475 × 1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | ModelModel | / | Z6180ZLC/S-7 Z6180ZLCZ/S-7 | Z6180ZLC/S-8 Z6180ZLCZ/S-8 | Z6180ZLC/S-9 Z6180ZLCZ/S-9 | Z6180ZLC/S-10 Z6180ZLCZ/S-10 | Z6180ZLC/S-13 Z6180ZLCZ/S-13 | Z6180ZLC/S-13A Z6180ZLCZ/S-13A |
| 2 | TypeType | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1350 | 1350 | 1200 | 1200 | 1000 | 1000 |
| 7 | Calibrated power Rated power | kW | 441 | 400 | 480 | 441 | 400 | 440 |
| 8 | average piston speed Mean piston speed | m/s | 9.45 | 9.45 | 8.4 | 8.4 | 7 | 7 |
| 9 | fuel consumption rate Fuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Outline ruler 寸 Dimensions(L×W×H) | mm | Length × Width × Height: 2640 × 1475 × 1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z8180ZLC/S-1 Z8180ZLCZ/S-1 | Z8180ZLC/S-2 Z8180ZLCZ/S-2 | Z8180ZLC/S-3 Z8180ZLCZ/S-3 | Z8180ZLC/S-4 Z8180ZLCZ/S-4 | Z8180ZLC/S-5 Z8180ZLCZ/S-5 | Z8180ZLC/S-6 Z8180ZLCZ/S-6 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 8 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1500 | 1500 | 1500 | 1500 | 1350 | 1350 |
| 7 | Calibrated power Rated power | kW | 800 | 735 | 698 | 661 | 720 | 661 |
| 8 | average piston speed Mean piston speed | m/s | 10.5 | 10.5 | 10.5 | 10.5 | 9.45 | 9.45 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side: Turn left Counterclockwise, The fire order is Fire order 1-5-7-3-8-4-2-6. Turn right Clockwise, the fire order is Fire order 1-6-2-4-8-3-7-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Dimensions(L×W×H) | mm | Length×width×height: 2986×1156×1990 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 4500 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z8180ZLC/S-7 Z8180ZLCZ/S-7 | Z8180ZLC/S-8 Z8180ZLCZ/S-8 | Z8180ZLC/S-9 Z8180ZLCZ/S-9 | Z8180ZLC/S-10A Z8180ZLCZ/S-10A | Z8180ZLC/S-13 Z8180ZLCZ/S-13 | Z8180ZLC/S-13B Z8180ZLCZ/S-13B |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 8 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1350 | 1350 | 1200 | 1200 | 1000 | 1000 |
| 7 | Calibrated power Rated power | kW | 625 | 588 | 640 | 600 | 533 | 570 |
| 8 | average piston speed Mean piston speed | m/s | 9.45 | 9.45 | 8.4 | 8.4 | 7 | 7 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The fire order is Fire order 1-5-7-3-8-4-2-6. Turn right Clockwise, the fire order is Fire order 1-6-2-4-8-3-7-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Overall dimensions Dimensions(L×W×H) | mm | Length×width×height: 2986×1156×1990 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 4500 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z6180ZLD/S-1 | Z6180ZLD/S-2 | Z6180ZLD/S-3 | Z6180ZLD/S-4 | Z6180ZLD/S-9 | Z6180ZLD/S-10 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1500 | 1500 | 1500 | 1500 | 1200 | 1200 |
| 7 | Calibrated power Rated power | kW | 600 | 551 | 515 | 478 | 480 | 441 |
| 8 | average piston speed Mean piston speed | m/s | 10.5 | 10.5 | 10.5 | 10.5 | 8.4 | 8.4 |
| 9 | fuel consumption rate Fuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas-electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Dimensions Dimensions(L×W×H) | mm | Length × Width × Height: 2640 × 1475 × 1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z6180ZLD/S-11 | Z6180ZLD/S-12 | Z6180ZLD/S-13 | Z6180ZLD/S-13A | Z6180ZLD/S-14A | Z6180ZLD/S-15 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1200 | 1200 | 1000 | 1000 | 1000 | 1000 |
| 7 | Calibrated power Rated power | kW | 400 | 367 | 400 | 440 | 360 | 330 |
| 8 | average piston speed Mean piston speed | m/s | 8.4 | 8.4 | 7 | 7 | 7 | 7 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Dimensions(L×W×H) | mm | Length×width×height: 2640×1475×1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
Zichai Z180 series oil and gas dual control LNG diesel dual fuel engine adopts the key technology of oil and gas dual electronic control, changing the technical route of the traditional single control natural gas mode of 'gas in and oil out'. It adopts electronically controlled fuel supply mode and works with variable fuel supply advance angle in pure diesel and dual-fuel working modes. The electronic control unit (ECU) controls and regulates diesel injection and natural gas injection at the same time, and independently optimizes pure diesel and dual-fuel working modes. Calibrate the working MAP chart to optimize in-cylinder combustion; improve the fuel replacement rate, up to 85%; the common working conditions of ships are mostly low speed and high torque, the dual fuel mode can meet the low load gas filling needs, and fuel substitution under low load conditions The rate is relatively high; the emission index meets GB 15097-2016 'Ship Engine Exhaust Pollutant Emission Limits and Measurement Methods (Phase 1 and 2)' requirements.
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z6180ZLC/S-1 Z6180ZLCZ/S-1 | Z6180ZLC/S-2 Z6180ZLCZ/S-2 | Z6180ZLC/S-3 Z6180ZLCZ/S-3 | Z6180ZLC/S-4 Z6180ZLCZ/S-4 | Z6180ZLC/S-5 Z6180ZLCZ/S-5 | Z6180ZLC/S-6 Z6180ZLCZ/S-6 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1500 | 1500 | 1500 | 1500 | 1350 | 1350 |
| 7 | Calibrated power Rated power | kW | 600 | 551 | 515 | 478 | 540 | 495 |
| 8 | average piston speed Mean piston speed | m/s | 10.5 | 10.5 | 10.5 | 10.5 | 9.45 | 9.45 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side: Turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Overall dimensions Dimensions(L×W×H) | mm | Length × Width × Height: 2640 × 1475 × 1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | ModelModel | / | Z6180ZLC/S-7 Z6180ZLCZ/S-7 | Z6180ZLC/S-8 Z6180ZLCZ/S-8 | Z6180ZLC/S-9 Z6180ZLCZ/S-9 | Z6180ZLC/S-10 Z6180ZLCZ/S-10 | Z6180ZLC/S-13 Z6180ZLCZ/S-13 | Z6180ZLC/S-13A Z6180ZLCZ/S-13A |
| 2 | TypeType | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1350 | 1350 | 1200 | 1200 | 1000 | 1000 |
| 7 | Calibrated power Rated power | kW | 441 | 400 | 480 | 441 | 400 | 440 |
| 8 | average piston speed Mean piston speed | m/s | 9.45 | 9.45 | 8.4 | 8.4 | 7 | 7 |
| 9 | fuel consumption rate Fuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Outline ruler 寸 Dimensions(L×W×H) | mm | Length × Width × Height: 2640 × 1475 × 1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z8180ZLC/S-1 Z8180ZLCZ/S-1 | Z8180ZLC/S-2 Z8180ZLCZ/S-2 | Z8180ZLC/S-3 Z8180ZLCZ/S-3 | Z8180ZLC/S-4 Z8180ZLCZ/S-4 | Z8180ZLC/S-5 Z8180ZLCZ/S-5 | Z8180ZLC/S-6 Z8180ZLCZ/S-6 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 8 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1500 | 1500 | 1500 | 1500 | 1350 | 1350 |
| 7 | Calibrated power Rated power | kW | 800 | 735 | 698 | 661 | 720 | 661 |
| 8 | average piston speed Mean piston speed | m/s | 10.5 | 10.5 | 10.5 | 10.5 | 9.45 | 9.45 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side: Turn left Counterclockwise, The fire order is Fire order 1-5-7-3-8-4-2-6. Turn right Clockwise, the fire order is Fire order 1-6-2-4-8-3-7-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Dimensions(L×W×H) | mm | Length×width×height: 2986×1156×1990 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 4500 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z8180ZLC/S-7 Z8180ZLCZ/S-7 | Z8180ZLC/S-8 Z8180ZLCZ/S-8 | Z8180ZLC/S-9 Z8180ZLCZ/S-9 | Z8180ZLC/S-10A Z8180ZLCZ/S-10A | Z8180ZLC/S-13 Z8180ZLCZ/S-13 | Z8180ZLC/S-13B Z8180ZLCZ/S-13B |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 8 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1350 | 1350 | 1200 | 1200 | 1000 | 1000 |
| 7 | Calibrated power Rated power | kW | 625 | 588 | 640 | 600 | 533 | 570 |
| 8 | average piston speed Mean piston speed | m/s | 9.45 | 9.45 | 8.4 | 8.4 | 7 | 7 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The fire order is Fire order 1-5-7-3-8-4-2-6. Turn right Clockwise, the fire order is Fire order 1-6-2-4-8-3-7-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Overall dimensions Dimensions(L×W×H) | mm | Length×width×height: 2986×1156×1990 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 4500 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z6180ZLD/S-1 | Z6180ZLD/S-2 | Z6180ZLD/S-3 | Z6180ZLD/S-4 | Z6180ZLD/S-9 | Z6180ZLD/S-10 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1500 | 1500 | 1500 | 1500 | 1200 | 1200 |
| 7 | Calibrated power Rated power | kW | 600 | 551 | 515 | 478 | 480 | 441 |
| 8 | average piston speed Mean piston speed | m/s | 10.5 | 10.5 | 10.5 | 10.5 | 8.4 | 8.4 |
| 9 | fuel consumption rate Fuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas-electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Dimensions Dimensions(L×W×H) | mm | Length × Width × Height: 2640 × 1475 × 1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
| Serial numberNo | Projectltem | UnitUnit | Technical specifications Technical specifications | |||||
| 1 | model Model | / | Z6180ZLD/S-11 | Z6180ZLD/S-12 | Z6180ZLD/S-13 | Z6180ZLD/S-13A | Z6180ZLD/S-14A | Z6180ZLD/S-15 |
| 2 | Type Type | / | In-line, four-stroke, direct injection, turbocharged, intercooled, irreversible n-line, four strokes, direct injection turbocharger, Intercoolig, irreversible | |||||
| 3 | Number of cylinders NO. of cylinders | / | 6 | |||||
| 4 | Cylinder diameter Cylinder bore | mm | 180 | |||||
| 5 | Piston stroke Piston stroke | mm | 210 | |||||
| 6 | Calibrated speed Rated speed | r/min | 1200 | 1200 | 1000 | 1000 | 1000 | 1000 |
| 7 | Calibrated power Rated power | kW | 400 | 367 | 400 | 440 | 360 | 330 |
| 8 | average piston speed Mean piston speed | m/s | 8.4 | 8.4 | 7 | 7 | 7 | 7 |
| 9 | Fuel consumption rateFuel oil consumption | g/kW. h | 185 (Pure diesel modeDiesel oil method) | |||||
| 10 | replacement rate Maximum substitution rate | % | 85 | |||||
| 11 | Compression ratio Compression ratio | / | 15:1 | |||||
| 12 | Crankshaft steering and firing sequence Rotation and fire order | / | Viewed from flywheel side:turn left Counterclockwise, The firing order is Fire order 1-5-3-6-2-4. Turn right Clockwise, the firing order is Fire order 1-4-2-6-3-5. | |||||
| 13 | Cooling method Cooling method | / | Closed water cooling | |||||
| 14 | Starting mode Starting method | / | Pneumatic start, electric start or gas and electric dual start Air, Electrical, air & electrical motor starting | |||||
| 15 | Lubrication method Lubricating method | / | Pressure lubricationPressure | |||||
| 16 | Dimensions(L×W×H) | mm | Length×width×height: 2640×1475×1735 (for reference only, the specific model shall prevail Only reference) | |||||
| 17 | net weight Weight | kg | 3400 | |||||
