How to deal with oil, water or gas leakage in diesel generators

Treatment methods for oil, water and air leakage in diesel generator sets: 1. Add pad to cure leakage. If there is oil leakage at the anti-leak gasket of the diesel oil pipe joint, you can add a layer of thin plastic with double-sided smoothness on both sides of the anti-leak gasket. Pad, tighten firmly to prevent leakage. 2. Leakage treatment method with paint flake liquid. If there is leakage at the seams of diesel engine oil tanks, water tanks, crankcases, etc., you can soak the paint flakes in alcohol and apply paint flake liquid to the clean seams to cure the leakage. However, paint chips are expensive and are generally used only in emergencies. 3. Use oil to cure leakage. When the paper pads in the oil pan, cylinder head, gear chamber cover, crankcase back cover, etc. of the diesel engine leak, as long as the paper pads are intact and the joint surfaces are clean, you can apply smear on both sides of the paper pads. A layer of butter and tightening the bolts will prevent leaks. If a new paper pad is used, soak the new paper pad in diesel oil for 10 minutes before installation, then take it out and wipe it clean, apply a layer of butter on the joint surface and then install it. 4. Liquid sealant leakage treatment method: When solid gasket defects (such as pits, grooves, cracks) occur on the diesel engine and cause interfacial leakage and destructive leakage, apply liquid sealant to the cleaned solid gasket joint surface. After curing, a peelable film gasket with uniform, stable and continuous adhesion can be formed to prevent leakage. 5. Anaerobic glue leakage treatment method: When leakage occurs in ventilation bolts, stud bolts, screw plugs, etc. on the diesel engine, apply anaerobic glue to the cleaned bolts, threads or screw holes, which can quickly solidify to form a film. , fills the gaps in parts, and can withstand greater pressure. It also has strong shock-proof and anti-loosening fastening functions. For example, it can be used on the threads of diesel engine high-pressure oil pipe joints to cure leakage. 6. Dimensional restoration glue to cure leakage. When leakage occurs in the shafts and sleeves, bearings and bearing seats, valves and valve seats, self-tightening oil seals, felt cups and packings on the diesel engine, dimension restoration glue can be applied and cleaned. On the worn parts of the mating parts, after curing, a thin film layer with heat resistance and high mechanical strength is formed. Then, mechanical processing such as turning, boring, scraping, and filing is performed to restore the geometric shape and matching accuracy of the parts, thereby solving the problem. Leakage problem. 7. Glue to cure leaks. When leaks are caused by blisters and pores in diesel engine parts such as fuel tanks, water tanks, oil pipes, water pipes, etc., apply glue to the clean damaged areas and they can be cured. leakage effect.