Normal and emergency shutdown of diesel generator sets

How to perform shutdown operation after the generator set is run? Just turn off the power supply directly? Hereinafter, Haixing will explain in detail the three operations of diesel generator set operation, normal shutdown, and emergency shutdown, so that everyone can learn from it. After the

operating

unit enters full speed, the generator voltage and frequency are normal and stable, the operator can open and close the generator. During the unit operation, the operator should also frequently observe whether the unit is operating normally, whether the control screen instrument indicator is in a political position, whether the control screen has pre-alarm indications, fuel tank fuel level and other operating parameters, and record the unit operating parameters regularly. Before the

normal shutdown

unit is shut down, the load is first separated, and then the unit is run for a certain period of time without load, so that the unit is fully cooled and then shut down. For some units with a shutdown valve installed, the operation of stopping the control screen key switch using the unit is invalid. For correct shutdown operation, press the shutdown button when the control screen is powered on to stop the unit from running. When

an emergency stop

is made, if the operator finds that the unit has a serious failure or a power distribution fault, he can press the emergency stop button on the control screen to stop the unit immediately. When no special situation occurs, it is not recommended that the user stop the unit by using the emergency stop button at will.

Whether it is a normal shutdown or an emergency shutdown, it is very appropriate to have a correct shutdown operation of the diesel generator set. These operations can protect the equipment from damage. Generally speaking, they are conducive to delaying the depreciation of the equipment. Haixing Power encourages everyone to talk about these indirect maintenance details to be done in place.